[DeanMember]

After as the air pressure will push on the rimlock and thus help to get a better grip

Also when trying to remove the rimlock make sure there is no air pressure left in the tyre! :laugh:

Ollie

[DeanMember]

mal5.1 wrote:

Quote:

Ollie wrote:

Quote:

Hppay Brhttady Casrh ya ol Bgguer!

Hvae a garet day as wlel Glily

Ollie

PS The spelling is an experiment im not really that illiterate :laugh:

What’s the experiment Ollie? You assume that everyone on this site can read that? I’d like to buy two vowels so it makes sense to me. How long did it take you to type it?

Gyday Mal welcome to my experiment Basicly most people dont recquire a word to be correctly spelt, as the brain will recognise the word as long as the first and last letters are placed in the correct order.

Hvae a go at the eprixenmt it wlil aamze eevn smoe one of yuor itnelctural ailbtiy :laugh:

Have a good one

Ollie

[DeanMember]

Hppay Brhttady Casrh ya ol Bgguer!

Hvae a garet day as wlel Glily

Ollie

PS The spelling is an experiment im not really that illiterate :laugh:

[DeanMember]

That reminds me have to put another order in for some more quality retreads just sold the last two

ollie

[DeanMember]

Hatto wrote:

Quote:

Ollie wrote:

Quote:

Hatto wrote:

Quote:

micknmeld wrote:

Quote:

Hatto wrote:

Quote:

Keep it up mick, you’ve got it beat now

cheers

hatto

THanks for the support Hatto,See how I go this arvo. Even if I falter I have already saved $75.00, you’d think that would be incentive in itself.

Incentive, I give some Incentive – If you keep off em you will be entitled to

travel to the wonderful south coast on a friday,(will give you a pass to get in) have beers at the club with a special guest(me), fishing charter on the sat,(46 foot cruiser, tackle/bait supplied) followed by best chinese dinner and beers at club, ride some sensational south coast singles on sunday and travel home at your leisure.

If you stay off them, this could and will all be yours

Cheers hatto

Hey Hatto I need some incentive to give up the smokes as well :laugh:

Ollie

This wasn’t incentive to give up the smokes, it was incentive to stay off em :laugh: :laugh:

OK I need some incentive to stay off them :laugh: :laugh:

Ollie

[DeanMember]

Hatto wrote:

Quote:

micknmeld wrote:

Quote:

Hatto wrote:

Quote:

Keep it up mick, you’ve got it beat now

cheers

hatto

THanks for the support Hatto,See how I go this arvo. Even if I falter I have already saved $75.00, you’d think that would be incentive in itself.

Incentive, I give some Incentive – If you keep off em you will be entitled to

travel to the wonderful south coast on a friday,(will give you a pass to get in) have beers at the club with a special guest(me), fishing charter on the sat,(46 foot cruiser, tackle/bait supplied) followed by best chinese dinner and beers at club, ride some sensational south coast singles on sunday and travel home at your leisure.

If you stay off them, this could and will all be yours

Cheers hatto

Hey Hatto I need some incentive to give up the smokes as well :laugh:

Ollie

[DeanMember]

micknmeld wrote:

Quote:

Whenever you get there mate :laugh: I get home at 4.30, dunno who or if anyone else is putting an appearance in or not.

Party at Micks Ill bring the Dutch Beers!!

If only it was a bit closer

Ollie :laugh:

[DeanMember]

Couldnt tell ya for sure Moto all I know is its 3 weeks on 3 weeks off and a shitload more pay

Ollie

[DeanMember]

Macs leaving the Navy and taking up a job as a second engineer on a crude oil carrier for woodside petroleum

Ollie

[DeanMember]

yeh I think Mac was doing a few minor mods to the “Old Bulls Racing Trailer” before he leaves for good,its getting close

We towed it up to Dungog weekend before last with three 450’s and all our gear in it,went like a pearler.

Mac hires his spit roast trailer out most weekends so may not always be available :laugh: He doesnt do anything by halves that fella :laugh:

Ollie

[DeanMember]

And a big Happy Birthday for tomorrow “fully loaded man”

Ollie

[DeanMember]

Trailboss wrote:

Quote:

Ollie wrote:

Quote:

Just finished putting the Gasser back together fired her up in 3 kicks Certainly noticed the compression increase and the bike just feels gruntier in the short ride I did up and down the street :woohoo: So Im back in the game yeehaa

Here is a list of what I did

Head machined by Greg ball

new countershaft seal (there goes my auto chain oiler)

new FT sprocket

rewelded the upper exhaust bracket retainer

new flexible pipe mounts

new exhaust gaskets
removed cleaned power valve
new power valve bearings
new FWD engine mount brackets I made from Stainless as the alloy ones are shite
repaired the LH radiator where I tore a core (epoxy bond)
repaired and modded power valve linkage
blast and paint exhaust
new Wiseco piston kit
adjusted power valve timing
new plug
new grips
new wheel bearings
greased linkages
renewed oil in Roc stomper

so now she is ready to rip :woohoo: :woohoo:

Ollie

Nice work Ollie they always require maintance eh. I love the piece of mind that comes after a freshen up.

The piston replacement around the 1500km mark yeah do you have an hr meter? I am just interested as I heard some piston replacement hrs quoted the other day.

Cheers Mate

TB

I reckon ive put about 5000 kms on the original piston and rings (yes gasgas has 2 )and they were both still within spec I got the wiseco kit cheap off my good friend Stefan from R&D so while I had some major repairs to do after a serious off I thought I would change it out I know of a Gasgas 300 that has 23000 kms on the original piston and rings (no not Diddels) :laugh: so that is a testament of how reliable these bikes are if treated right.

Ollie

[DeanMember]

singletrackmind wrote:

Quote:

Photos Ollie!

STM

Sorry Scotty didnt get any photies

[DeanMember]

Just finished putting the Gasser back together fired her up in 3 kicks Certainly noticed the compression increase and the bike just feels gruntier in the short ride I did up and down the street :woohoo: So Im back in the game yeehaa

Here is a list of what I did

Head machined by Greg ball reduced squish from 3.1mm to 1.1mm

new countershaft seal (there goes my auto chain oiler)

new FT sprocket

rewelded the upper exhaust bracket retainer

new flexible pipe mounts

new exhaust gaskets
removed cleaned power valve
new power valve bearings
new FWD engine mount brackets I made from Stainless as the alloy ones are shite
repaired the LH radiator where I tore a core (epoxy bond)
repaired and modded power valve linkage
blast and paint exhaust
new Wiseco piston kit
adjusted power valve timing
new plug
new grips
new wheel bearings
new rear pads
greased linkages
renewed oil in Roc stomper

so now she is ready to rip :woohoo: :woohoo:

Ollie

[DeanMember]

Get it right TB Dave had the Grass Grub I had the Rock hopper :laugh: Only the seat had suspension.

Ollie

[Author]

Posts