[Scott HanleyMember]

Hi Chris

Might be a bit late but found these ramps online that would look good in the van http://www.aerotrans.com.au/

[Scott HanleyMember]

Thanks minus one, MadManiac

i will have a look at those.

[Scott HanleyMember]

Trailboss wrote:

What year model is it Scotto? I only ask because I may know where there are some cheap under bar mount MSC. MSC also make the Rally Moto and are an awesome damper that covers all conditions.

BTW does it shake its head on trailing throttle, under brakes or under acceleration? Have you done anything the the suspension?

TB

Hi TB

Its a 05. It seems to happen under acceleration both up hill and down hill. I had my suspension done by teknik last year full re spring and valve front and rear. have spoken to them and set everything as per there instruction. I have set the forks all the way down and sag has been set to there requirement for the progressive spring.
Its dosent seem as bad after reseting it but still there.

Cheers
Scotto

[Scott HanleyMember]

Hi Nickj

Thanks for the reply I saw your post on Rock good to hear about the service you got, I didn’t want to ambush the thread thats why i started this one.
I’m mainly on single track preferably tighter gnarly stuff. I’ve had a bit of head shake and would like to eliminate.

Scotto

[Scott HanleyMember]

I got a enclosed trailer 2 months ago best thing, I have 3 bikes mine 2 for the kids keep all the gear in there so we don’t forget anything also a good workshop out in the field. Only got a single axle with electric brakes easy to manouver and reasonably lite doesn’t seem to hold the 454 back

Scotto

[Scott HanleyMember]

:woohoo: That’s great I was having trouble keeping up with current label application. Will it be the same with boats?

Scott

[Scott HanleyMember]

Unfortunately not able to make the bd ride mrs is taking me to the big rock in the centre. Me and a few mates have been using the kenda carlsburg and found them to be a great tyre riding a lot round Dora creek and red hill. I like the 952 when it’s new but can get scary half worn. Just bought set of kenda buds creek will let you know how they go.

[Scott HanleyMember]

What does the freezer?

[Scott HanleyMember]

Nice set up. What pressure did you put in it?
Scott

[Scott HanleyMember]

I prefer the smaller grip. I use acetone to clean the bar the insert 3 cable ties inside the grip position the grip then remove each cable tie. Wire them up I have never had one move until they are stuffed.

[Scott HanleyMember]

Hi Wolfie

Hope you are feeling better :ohmy: . Thanks for the heads up that you weren’t coming appreciated.
You missed a great ride hopefully we can catch up another time.

[Scott HanleyMember]

Hey fender

You have 2 nights to fix that ride Friday with us Leaving webbs creek ferry 0800 Friday

[Scott HanleyMember]

No probs Wolfie I will keep you informed

[Scott HanleyMember]

Hi guys

I’m out for Ourimbah. I am still going to ride from Wisemans on Friday as I have already organized with a couple of other guys and my son. Your more than welcome to join it will be grade 2 may be bit harder at times.
Let me know and I will work out time and place.
Scotto

[Scott HanleyMember]

Hi Wolfie & Bender

What sort of riding do you normally do? What bikes? I don’t know the grading system as I haven’t done a ride with the old bulls.
There are quite a few just dirt roads there with the odd single off wheel barrow ridge rd and bicentennial rd so go in webbs creek ferry and out at lower portland ferry and see where we end up.

[Author]

Posts