[Jason AndersonMember]

Lefty wrote:

Yes I would mhave to agree with TB. Although there is another good reason to run an exhaust bung, especially if you have say 3 bikes on one trailer and one is put on backwards so bars don’t clash etc. All the air, water dust etc when travelling will enter your pipe (on the one facing backwards) and if you exh valves are open this crap has the potential to enter your engine, with the possibility of causing damage. :huh: :ohmy:

Cheers,
Lefty

+1
The only time the bung is out of my pipe,is when its running.
I have nearly 15,000 DIRT ONLY KM on my bike and havnt had any dramas with the motor at all.

…spud…

[Jason AndersonMember]

14/50 Bob.Been running that for 7 years.

…Spud…

[Jason AndersonMember]

Im out Ollie..

…Spud…

[Jason AndersonMember]

Good stuff lefty.
Im trying to get my daughter on her PW at the moment but she is not keen..
Thats ok by me because im sure in her own good time she will let me no when she is ready.
Or if not. .
Good luck and happy racing with Riley.

…spud…

[Jason AndersonMember]

rossco33 wrote:

Good ride today at
[attachment=3101]IMAG0302.jpg[/attachment]
macksville, the beers were good after the early finish. Nice sprocket ev.

Good to see things hav.nt changed ev. 😆 😆 😆
…spud…

[Jason AndersonMember]

No racing today.
Maybe later in the year

…spud…

[Jason AndersonMember]

Im out EV.

Sorry mate.Myself and family are on flood watch..

…spud…

[Jason AndersonMember]

EAGLE`02 wrote:

:laugh:
Can`t wait for the pics of that,,, Big Steve and a backpacking Pom

Good onya Lefty for the update

Backpacking Pom… :laugh: :laugh: :laugh: :laugh: :laugh:
GOLD Eagle,GOLD Mate :laugh: :laugh: :laugh: :laugh: :laugh:
…spud…

[Jason AndersonMember]

Lefty wrote:

Well I picked up Nickj’s Tenere from Barrett’s (Nice bloke Jason Barrett great products too!) at Bilpin to diagnose and repair the clutch issue. The boys kindly pulled it apart and left me with a dead Ten and a bag full of clutch parts. :huh: :laugh: :laugh: I got it back to the workshop, found a maintenance manual and proceeded to diagnose what went wrong and look to see if I had to order any parts. I found all the parts were ok and nothing was missing or needed replacing on the big Ten, so I re-oiled the clutch plates installed the pressure plate & re-torqued, installed the clutch cover and fired her up. I have just completed around 12-15km and all is perfect. One thing that i did find is that when I checked the oil it did not register on the dip stick :ohmy: . I think this may be a bit of an issue with the clutch or the release bearing running dry. But all seems ok now.

Cheers,
Lefty

Nickj’s Tenere in Surgery

Repaired and ready for more Adventure

How was he lefty??
I bet he was a little pisst off.. 👿 👿
Well done lefty.OBT spirit right there…
Good job mate

…spud…

[Jason AndersonMember]

mike wrote:

Hey Ev,

How many ks are you looking at doing per ride?

My 450 normally gets around 85-90 before reserve , is that enough? :dry: :dry:

come on Murph, will be an awesome weekend 😆 😆 we’ve got over 6 hours to get there :S :kiss:

400 to 600mm 0f rain in the next few days..
NBN WEATHER….You mightin get here mike…

…spud…

[Jason AndersonMember]

Capt. Furious wrote:

THATS AWESOME……..Top photos..

wish i was there…..spud…

[Jason AndersonMember]

Boony wrote:

Ollie wrote:

:laugh: :laugh: yes Boonster it is including all of the bridge crossings and and mesh Hills :laugh:

Ollie

I can see the odd sweep holding up proceedings in some spots, unbelievable terrain they will be riding in. :ohmy:

I carnt wait to get down there..this sounds unreal..If its anything like mt seaview …
BRING IT ON…

…Spud…

[Jason AndersonMember]

Trailboss wrote:

Thanks Mick, I am away at the moment and couldn’t help. I was hoping Nick could but remembered he is away also :laugh:

Spud get those stickers in the winning pictures for the local paper :laugh: mention your sponsors

TB

YA. No worrys TB.Ill do my best.Mick sorted me out with some stickers. .There on there way as we speak.
Ill try and get some photos of the day.Carnt wait.Yeeeeehaaaaa.

…spud…

[Jason AndersonMember]

Trailboss wrote:

Awesome carts Spud. I built 100s of carts as a kid billycarts were big on the hill at Dads place. None of them as flash as yours. Although I didn’t see a stubby holder :laugh:

Good work mate a special time in yours and the kids live mate very jealous as I will be away riding :laugh:

TB

Thanx TB…
One problem tho……

I need some OBT stickers on the carts so i can look the goods…..
They,ll look good on the carts.. :whistle: :whistle:
Might give me and me drivers some good luck aswell..

cheers mate…spud…

[Jason AndersonMember]

Lefty wrote:

Great work Spud! :woohoo: :woohoo:
Good Luck on Aust Day and may your Billy Cart stay on all four wheels. :unsure:
Hope to catch up for a ride some time in 2012

Cheers,
Lefty

Cheers left one.
Would be tops to catch up for a ride in 2012 for sure……
Had a ball at coffs in those singles.Will never forget them creek crossings we done.
Good times.. :woohoo: :woohoo:

[Author]

Posts