[GregMember]

EAGLE`02 wrote:

He did but it afterall,, that was silly enough wasn`t it ???? :laugh:

He but it ? :huh: and you call him silly

TB

[GregMember]

Walshy wrote:

Hi there, Can anyone help me with an adventure set up for my wr 450. I heard there is someone out there that makes a bash plate/ oil tank to decrease oil changes. Also if anyone knows where to get a cush drive hub for the rear wheel. Is there a one stop shop in Aus. don’t like the idea of spending over seas.

Cheers

Walshy check this post out Crowey seems to know WR450s has build a cracker, one of the best prepared and thought out I have seen for a while and its faster than most it seems :laugh: . He seems helpful, passes on information doesnt blow his trumpet just seems a nice guy

As for the bash plate B&B do the oil reservoir Bash Plate 1.7 litre

And as for the one stop shop Steve at Adventure Moto is your man, I am helping build his WR450F APC rally weapon at the moment. Steve can get anything you need. PM and I will give you Steve’s mobile number. He is a site supporter and you get looked after

TB

[GregMember]

EAGLE`02 wrote:

Yeah I suppose so mate,,,
I have from here to Sunny Corner sorted, depending on what time I get away. Will be runng the Go Cruise, but can load it onto the Garmin as well as a backup

Will pm my email to you again just in case you have lost it again :laugh:

Cheers

Will send you your place to Sunny Corner use if you want, the Saturday route I will load on friday night on site. Bring a lead for your GPS

TB

[GregMember]

EAGLE`02 wrote:

Yeah, but I presumed the sat ride was starting elsewhere at the time

I am still super keen to stick to the plan, lucky I put in for the friday off hey ??? Might call on you to carry my black can supplies then as well :laugh:
I can ride to the camp on the friday no worries, there were a few others keen on riding down too, Ace was one that comes to mind ,,, I will try & lure them out & hatch a friday ride plan to get there

Will keep you posted on the other stuff as it unfolds ,,,,

Cheers

Want a route, already have one done from youre place, and I have saturdays both down and ready to load onto your GPS?

TB

[GregMember]

EAGLE`02 wrote:

So with the new plans, is there any idea of the start point for the Adv ride to the campsite TB ??? Looks as though we may have to see what numbers there are and set a meet point & time closer to the day

Eagle the plan for Saturday’s adventure ride is for the ride to start from the camp site at 9am. Lunch at Capertee Pub and then a different route back to the camp site. Sunday the adventure peeps will have the option of a shorter route or they can start home depending on their hangover.

Eagle you need to go as you are leading the Saturday ride remember?

EAGLE`02 wrote:

Looks like I am the leader then hey ????
Cheers

You will need to do the hard yards to get up there Friday evening mate (come on mate ) Will have a warm camp fire for you promise :laugh:

TB

[GregMember]

Hey Unit check if the new sprocket is thinner than the old one in its cross section. If it is get the correct sprocket and if it was me I would replace the seal, o ring and washer as its been in there a long time, its an easy job and offers piece of mind. If the sprocket is the correct thickness then I would replace the washer (because its lost its ability to hold tension against the sprocket) seal and o ring again because its been in there a long time and piece of mind. Always locite the sprocket bolt as well

Oh always check the breather as well, if its blocked crankcase pressure will build and something will leak

TB

[GregMember]

wolfie wrote:

HI TB ILL BE THERE ON FRIDAY AS WELL AND IF YOU NEED A HAND JUST LET ME KNOW .JUST WONDERING IF YOU GOT MY MESSAGE THE OTHER DAY .WHAT IS THE GO WITH FIREWOOD I MITE BE ABLE TO SORT SOME THING OUT IF NEED BE

Hi Wolfie, yeah mate got your message but i have been away with the family. I will be in touch in the next couple of days. As far as firewood goes I think I have it under control, I have spoken with a bloke about dropping a load of at the site on the friday.

Will speak soon, cheers mate

TB

[GregMember]

chris72a wrote:

wolfie wrote:

HI TB ILL BE THERE ON FRIDAY AS WELL AND IF YOU NEED A HAND JUST LET ME KNOW .JUST WONDERING IF YOU GOT MY MESSAGE THE OTHER DAY .WHAT IS THE GO WITH FIREWOOD I MITE BE ABLE TO SORT SOME THING OUT IF NEED BE

Hey Wolfie, TB is probably asleep, I would say yes if you can bring firewood… We were hunting for it last time so the more the better.

Cheers
Chris.

No I am here :laugh:

[GregMember]

You get yourself and your gear to the camp site this year

This years Birthday ride weekend is different to previous years in that everyone will drive themselves to the camp. You can bring whatever you need and want. The closest servo is about 8kms away so it’s easier to bring everything. At this stage it looks as though dinner will be catered but more on that later

Chris, Mal and I to name a few will be getting there on Friday at sometime, the exact location and a map will be posted soon

Please keep reading the first post

TB

[GregMember]

Good idea Chris I will also update it as I gather gear in. Also so people know there will also be some awards given away as per the other year’s parties :woohoo:

Spud is building custom OBT enclosed BBQ spit along the lines of his pot belly stoves and other wicked custom metal work gear

There will be prizes and auction gear from, Dirt Bike Deals, CM Tools, Teknik’s, Adventure Moto, Whipps Alloy, Sutto’s, Camelback, Barrett’s, Jack Links, and Pivot Pegz

I am also discussing options with some other businesses at the moment

TB

[GregMember]

GaleyKTM300 wrote:

Awesome stuff. Well done to Steve at Adv Moto, Yammie Aus and TB. :cheer:

Can I have a ride after Bob puts all the scratches in it and bends the bars! Best bring the power tuner gizmo and set it to Gumby for Bob and I. :whistle:

TB , you are on one of my loops are you not?

Is Reeksy confirmed mate? Chatted to him at Kowen about coming. No definite answer given. :S

No worries Galey,

Yes planning to ride your morning loop saturday :woohoo: will be to busy to ride saturday arvo I think :huh:

Reeksy umm I dont know anything about him coming, pretty sure its Clubby. I am sure I only mentioned Clubby coming from Trailzone :blink: umm someone will :laugh:

TB

[GregMember]

Bob wrote:

WTF

I must have a nack of starting some sort of crazy shit

I thought we were going camping and riding motorbikes
know it looks like we r going to someones f@#$%^&* wedding and we have to pay a covercharge to get in to the bloody thing
do we have to wear a tie

and the comedic entertainment has blown out to some ……… bloke in a spider kini

it must be the adv rider input or something i don’t know

I’ll start again

I’m looking for a spit or 2 I’ll supply the lamb/s

I’m going camping and riding

and if someone wants to let me ride there new efi wr that would be good

if all else fails Mal we will use yours get blind and watch these crazy people at the Bromance wedding apparently at the same spot (if i could be bothered to find that photo of a famous bromance i would ….but i can’t)

??? :huh: Chris and I thought it would be a good thing to have the main dinner catered for mate. The dinner cover charge would cover as listed below

Chris’s thoughts were to free everybody up from cooking and rooting around. It helps us get the evenings auctions under way knowing everybodies eaten, beats stuffing around after a full days riding doesnt it :dry:

TB

[GregMember]

adam wrote:

I’ve found that recently I can only post pictures as attachments.

If you delete the “insert” part and leave the attachment bit your message should re-appear to the rest of us

No guarantee though

Adam.

Again PM admin with it, if Chris doesnt know he cant fix it

TB

[GregMember]

GaleyKTM300 wrote:

Chris can you have a look at why the pics in the last couple of posts havent come up please. :unsure:

Best PM admin Galey Chris will see it There has been editing problems as well

TB

[GregMember]

Welcome Steve plenty of rides on mate to suit everybody. Check the birthday ride loops they are to suit the whole family. Have been around a new WR lately seem a good bit of kit (for a yamaha :laugh: )

Yeah Jacko is dented but wait till Boony gets here :laugh: :whistle:

TB

[Author]

Posts