Forum Replies Created
-
AuthorPosts
-
Nickj wrote:Ollie wrote:You could use a 14mm Hex bolt with a couple of Lock nuts.
I have used similar for the front wheel of my gasser :laugh:
Ollie
Shhhhh Ollie , theirs Strongbow on the line here
Hey you remember that one I had that wouldnt stop spinning :huh: The strongbows I dont care I am drinking the carton Wiggy gave me :laugh: :laugh: :laugh:
TB
Ollie wrote:You could use a 14mm Hex bolt with a couple of Lock nuts.I have used similar for the front wheel of my gasser :laugh:
Ollie
Tried that Ollie with up to 3 nuts etc. Bent the spanner tightening the nuts even and the thing still turned :huh: . I will weld the nuts and spin them on the lathe at work
TB
I will make 6 of them this week for you guys. Cost you a stubbie of strongbow cider each. Will deliver them to Breckenridge of Friday.
A single cider no moreTB
CHOOT wrote:TrailBoss wrote:CHOOT wrote:Just a note to those with 50.000km on there Teneres my gearbox has failed toosame symptom’s as TB,s I had the selector bearing changed as soon as I read TB,s post at about 45000km :blink: now in the process of removing the motor. CHOOT
Damage may have already been done? Was the bearing split like mine?
TB
TB a peace of the bearing ” sprag side ” found at the bottom of the motor under the clutch . Yes I think the gear was at the point of failure at the time I replaced the selector bearing. CHOOT.
No good mate, can you PM me your number as I would like to chat about this as I have a friend with an ear that maybe interested in some information about your bike
TB
MrSquiggle wrote:Boony wrote:Just letting you know Mr squiggle. I’m not going to be on this ride. 38 degree average over the three days isn’t my cup of tea. Maybe next time.Boony
Hey Boony,
No worries mate but FYI the forecast on BOM and weatherzone is for 28 and 26 degrees, and its always a couple of degrees cooler in the forest as we are riding through alot of rainforest area. There is a low chance of rain on the Sunday so hopefully that should equal some cloud cover at the least. I generally dont trust the forecast until a couple of days out anyway.
If we do end up with hot days we will look at moving the leave time forward to 7 AM maybe.
Yeah I have been watching the weather for our weekend a little further up the coast and its going to be a cracker weekend for riding weather wise
TB
You look after the drive line then :laugh: As for the dropping it :whistle:
TB
james wrote:TrailBoss wrote:CHOOT wrote:Just a note to those with 50.000km on there Teneres my gearbox has failed toosame symptom’s as TB,s I had the selector bearing changed as soon as I read TB,s post at about 45000km :blink: now in the process of removing the motor. CHOOT
Damage may have already been done? Was the bearing split like mine?
TB
Mine is now 3000 shy of the suggested 30000 check up on this issue, and it sure looks like it may be an idea to have it seen too as I wont be getting a new one anytime soon.
Is there anything else that would need checking at that interval as I had better start to save my pennies for the inevitable :pinch:
Cheers james
Inevitable :huh: I am not sure James. There are more of them around world wide that have more miles with no failure that those that have failed. My black one was ridden hard, I don’t know about Choots.
The big difference between your gearbox and drive line and my black one for example is you get triple the chain and sprocket life I do. You also get double the tyre life at least, meaning your drive line. gearbox etc is not under anywhere near the stress mine was. You don’t jump water bars (most I have notched are in 3 rd gear) which shocks the drive line.
Get the bearing done, I will help you with that. Its cheap and be reassured yours will last until you rebuild the engine in the 80’s the way you look after itIMO with these bikes
TB
Nah I wish, 3 bikes to prep for next weekend :laugh:
Enjoy whomever goes riding
TB
tryhard wrote:Video of yesterdays ride, :woohoo:Still running her in so a bit tentative
Will need to get on Murths 5 hills ride to really break her in ! :woohoo: :whistle:
Run in full HD,not sure why but quaility is a bit low 👿
Good stuff Tryhard
TB
Ollie wrote:Hey TB, Id be up for the Fence stuffJust so happens Im going thru a little fencing Dilemma with my rental at the moment.
Ollie
Done Ollie its yours champ. Ring me regarding pick up mate
Funny Rocket I thought of Ollie when I posted it :laugh:
Regardless it will help someone that needs it
TB
SOLD OR GIVEN AWAY :laugh:
Color bond fencing panels, posts with top and bottom rails
Ironbark colour (One white one :dry: )
They are second hand and have been laying there since Backyard Bliz did their thing next door a few years ago. They replaced our fence because of the neighbours :laugh: Crash and I had put it up not real long before that. Need to get rid of them as I am doing my deck soon.
Anyway its free, pick up only
Top and bottom rails
Panels (around 16 to 20 I think)
Posts (rusted end goes in the concrete
)
TB
What Spud said
Sell the Vee Strom :laugh:
TB
Hey enjoy your ride guys!!
January 26, 2014 at 12:04 am in reply to: Rideadv 2 day Navigation ride North Coast NSW Feb 1st and 2nd 2014 #253568Yeah Lefty there are some awesome trails this weekend coming up. I can’t wait the special loop is up and down the ladder plus :whistle:
TB
CHOOT wrote:Just a note to those with 50.000km on there Teneres my gearbox has failed toosame symptom’s as TB,s I had the selector bearing changed as soon as I read TB,s post at about 45000km :blink: now in the process of removing the motor. CHOOT
Damage may have already been done? Was the bearing split like mine?
TB
January 25, 2014 at 10:06 am in reply to: Rideadv 2 day Navigation ride North Coast NSW Feb 1st and 2nd 2014 #253547If you are going next weekend here is a pre view
Watch it in 1080HD or at least 720HD if you can
https://www.youtube.com/watch?v=KzH5i7E-fZs
TB
-
AuthorPosts