[GregMember]

Your care package is packed Mal and addressed the girls will drop it in at your place as they go past as they are traveling up your road from the lunch stop to the Dark Corner (cue evil laugh)

TB

[GregMember]

Some of the early XL’s had the points on the end of the cam up on the head if I remember right didnt they Blue?

TB

[GregMember]

Just ride on the track and you wont have a problem with hidden ditches fool! :laugh:

TB

[GregMember]

micknmeld wrote:

Quote:

Trailboss wrote:

Quote:

Yeah Mal I just spoke with a guy in Oberon he said its snowing there as we speak, thats only 30 kms as the crow flies from where we are going :ohmy:

TB

You guys are mad!!:ohmy: Good luck to all on the ride,cant wait to see the pics and hear the stories.

Really is no different to the snow ride at Vic that Menace is running, actually we probably wont see snow they will

Those creek crossing we did out the back of Capertee on the Hillend ride will be cold but !!

TB

[GregMember]

Yeah Mal I just spoke with a guy in Oberon he said its snowing there as we speak, thats only 30 kms as the crow flies from where we are going :ohmy:

TB

[GregMember]

micknmeld wrote:

Quote:

singletrackmind wrote:

Quote:

Cheers Scott

Got my pegz yesterday. I will fit em up and go test them this weekend. The sun has been out all week so it should be perfect conditions tomorrow.

Thanks again

STM

The Cobb and Co into Wauchope must have been held up. I am yet to see my new pegz.

OH thats just begging for it, for a sledging that is

TB

[GregMember]

Wont be at Chicken till 8.30pm , see if you can source so little hose clamps as well, triple loops of lock wire tightened or medium sized cable ties pulled tight around the hose fittings also does the job.

Welcome to duck down and get them at 8.30 if you want, but Pirtek or any of the hose fitting services should get you out of trouble

TB

[GregMember]

Jeffro I have just been going through some of the old fittings and hardware I have here and I have some brass T pieces and brass taps ( we had trouble with plastic taps when we went to the cape in 2004 falling to pieces with the vibration )

I have put the fittings in the trailer that the girls will be towing on the weekend.

The two studs that go into the tank shouldn’t be overtightened either as they will pull out of the tank if you just nip those up and use the straps criss crossed over the tank that stay put in even the biggest crashes :ohmy:

TB

[GregMember]

EAGLE`02 wrote:

Quote:

Anyone got their Heated Grips installed & running yet ????
I`m doin` mine say arvo (I hope:dry: )

Say what arvo Beagle?? :laugh: :laugh: :laugh:

TB

[GregMember]

Boony wrote:

Quote:

do yous mind doing some main (dirt) road stuff.

WHAT, WHY? Thought sunday was the softer ride??

TB

[GregMember]

Big ride saturday

TB

[GregMember]

Good to see you here as well Bull couple minutes after your mate again :ohmy:

Sorry for the hi-jack Bear

TB

[GregMember]

90% of modern 4 strokes have two drain plugs Boony, just have to deal with it princess and drink more in the shed :laugh:

TB

[GregMember]

Welcome Bear, happy to have you on board mate, read, post, ride and be merry

TB

[GregMember]

Jeffro wrote:

Quote:

The rear tank turned up today so I have fitted the tank and run the fuel line but there isn’t enough room to fit the t-piece between the fuel cock and the inlet on the carby with the one they sent me :angry: . I was going to get a brass one anyway but now it needs to be shorter to fit.

I’m also worried that the fuel may not get through from the back tank because the line has to run uphill at one point. Does anyone else think it will be a worry or will there be enough suction to pull it through?:dry:

The fuel will run Jeffro has long as the tank is higher than the carby, trust me I have fitted these to DR’s before, its tight and yes a brass T piece is the go

TB

[Author]

Posts