Paul

Forum Replies Created

Viewing 15 posts - 541 through 555 (of 828 total)
  • Author
    Posts
  • in reply to: Project Motard DRZ400 #153551

    Paul
    Member

    They must be busy setting the chain length.

    in reply to: Now thats a MAST #153460

    Paul
    Member

    Excellent idea Eagle, please PM me the time & location.

    Fat looking boom, will the main roll down into it?

    in reply to: Now thats a MAST #153529

    Paul
    Member

    micknmeld wrote:

    Quote:
    My brother is the registered owner but a Japanese guy is the actual owner(long story). After the Miami boat show it was shipped to Japan,where it still is.If you have a spare 2 Ozzie million we will deliver it to your address if you like.

    Sounds good Mick but the problem is I live next to a lake which only has a shallow non navigable entrance.

    I could not cope with a half hour drive/ride to get to my new boat :S

    OH the bank probably wont lend me $2M anyway.

    in reply to: Now thats a MAST #153531

    Paul
    Member

    2 years ago it was $2US/nautical mile for experienced crew/helm I think but yeah, you earn a bad rap for yourself if you bail halfway.

    in reply to: Crikeys it’s slow in here today #153535

    Paul
    Member

    DennisJM wrote:

    Quote:
    Hit a wire strung across a track that lead to a disused quarry once in my Land Rover. Right at neck height for a bike rider, sheared both the wing mirrors off, would easily have decapitated a rider at speed. Probably just kids but damn thoughtless just the same.
    Ride with care,
    DennisJM

    Hi DennisJM, it is always good to greet a new member here.
    Why aren’t you out riding on such a good day?

    This wire incident, is bad and highly illegal.
    Can you let me know when and where exactly it happened?
    You can use the private message system if you dont want the location publicised.

    Cheers, Beemer.

    in reply to: Now thats a MAST #153518

    Paul
    Member

    Ha, Ha Mick, nice one – couple of events actually.
    Good to hear you did a good job of commissioning it. I bet the owner was glad it happened to you and not them.
    Perhaps you didn’t tell?

    Speaking of off shore events, I was delivering a Sydney 38 from Southport QLD to Sydney once, owner was on board and they were sipping champain and eating caviar in the sun, doing about 5-7Kts under spinnaker off Surfers, perfect postcard stuff, I am half asleep on the foredeck.
    Anyway I heard someone say something about steering (no autopilot installed) and the spinnaker collapses and we’re going round in circles!
    WTF? Panic stations – pull down the kite, dump the main yeah yeah “WTF happened boss?”

    “No rudder control”
    So we started the motor and setup the tiller and continued with two people required to steer.
    Then he is gone, nowhere to be seen, WTF? Search the ship!

    He was in the big space the 38s have around the rudder shaft trying to fix the 3mm spectre that had snapped.
    Clearly this happened before and they forgot to fix the jerry rig.

    We ended up using an old halyard line to fix it, which probably lasted years and we made it back to Neslon Bay before the weather stopped us there.

    in reply to: Now thats a MAST #153514

    Paul
    Member

    Hey Mick, did the Hatteras have a networked computer system which could tell you where to pull in for fuel or did it have to be calculated manually?

    in reply to: G450X factory replica #153510

    Paul
    Member

    OK so they prolly just wack on the sticker kit and muffler and another 1.5-2K on the price tag.

    I am looking at the Leo Vince exhaust for mine, it’s probably at 1/3 the price of the Akro and is half the price of a Remus system and it looks noiice with the carbon fibre end thingy.

    in reply to: Now thats a MAST #153509

    Paul
    Member

    As you would know Mick the multihull is a very stable boat.
    That one looks like a nice bit of kit too.
    Mono hull (or tippys as some call them) are fun too but not as good for entertaining the VIP’s.
    It is great fun doing social racing but one needs to sail ‘defensively’ because all the wannabee’s do it too and some forget their manners, others have no idea about the rules and some have no regard for manners or rules (a bit like this place).
    Thats why it is fun watching the ‘big boys’ bashing into each other while you sail past for a win B)

    in reply to: Now thats a MAST #153503

    Paul
    Member

    EAGLE`02 wrote:

    Quote:
    Cheers Mal,
    That job is about to end anytime in the next 4 – 6 weeks but :blink:

    Eagle if I were you, with future employment uncertain, I would definately look into joining the delivery run.
    I would be surprised if the owner did not fly you home but you may not need the trip home straight away.
    As they say “you never know whats over the horizon”.
    Just be prepared, dress well, be open minded and professional.

    in reply to: Now thats a MAST #153483

    Paul
    Member

    Trailboss wrote:

    Quote:
    Hey Eagle got any pics of the rest of the boat?

    TB

    Tadaaa
    necker-belle-rendering.jpg

    in reply to: Now thats a MAST #153452

    Paul
    Member

    So the bump at the top of the forestay is a man.
    The pic doesn’t give a real good idea but it must be big if there is room for a radome on the spreader.
    Can you tell us who owns it Eagle or the web site of the boat?
    Where is it going to live?

    in reply to: Crikeys it’s slow in here today #153392

    Paul
    Member

    Uncle Fester wrote:

    Quote:
    Are they the same rims on the DRZ as they are on the BMW. Don’t let Kylie see the DRZ Motard shots, for Dans sake.

    Yes they are.
    Kylie bought the DRZ specifically to bling it up and motard it, no dirt use for that bike. He’s OK with it.

    in reply to: Crikeys it’s slow in here today #153388

    Paul
    Member

    He’ll find it, I’ve told them about it in the appropriate thread.
    You need a good business case for them to unblock the streaming video sites at work. think man think hard.

    in reply to: Crikeys it’s slow in here today #153384

    Paul
    Member

    This might keep ya’s entertained for a few secs…..

    [video]http://s75.photobucket.com/albums/i307/Penno01/?action=view&current=Awsomecontrol.flv[/video]
    Edit; I still cont get this video thing right (Admin?)

    [video][IMG]http[/video]

    Aarrrr!
    [video]http://<embed width="448" height="361" type="application/x-shockwave-flash" wmode="transparent" src=[/video]
    Farrkkk![img]http://s75.photobucket.com/albums/i307/Penno01/?action=view&current=Awsomecontrol.flv[/img]

Viewing 15 posts - 541 through 555 (of 828 total)