Forum Replies Created
-
AuthorPosts
-
Trailboss wrote:
TB you didn’t tell us you were doing an OBT appearance at the Margi Gra. :pinch:
i woulda…..:whistle:
no i wouldn’t :blink:
hi huddo, you missed a prime opportunity to meet and greet with some of the Vic crew.
i couldn’t make it 2X
, spewin!
they are showing one of our northern bro’s around the best south Vic. has to offer.
and if you remember a Chick on a CRF230 on the Fremantle to Proserpine ride, that is ‘our’ very own Katgirl!!! :woohoo:
welcome to the site and enjoy a laugh with everyone and sometimes at yourself
:cheer:
a family of cannibals are sitting down to a feed of Blonde.
the father starts shaking his head and has a little giggle.
the wife ask what’s so funny.
oh nothing he replies, this has got to be the dumbest thing i have ever eaten.
bit of a poor effort if you ask me, we could have done that on knobbies.
aido wrote:
Quote:xy-transit wrote:Quote:there’s the answer to your bike dilemma Aido, just convert the V-RodIm taking the V Rod out tomorrow Drewpy and im actually looking forward to it
so the V Rod dose have a knob on it then….
um i mean a set of knobbies on it then.
👿
you meeting up with Smerf then, to re enact Wild Hogs?? :S
hahaha no worries Menace
i was never any good at Geometry either :silly: , i did google Conargo Australia before i posted just to make sure there wasn’t another conargo. :laugh:
it’d be one hell of a ride though. need a few tubs of margarine :pinch:
:laugh:
Sydney to Conargo is a bit more than 380km. i’m only 20km from conargo. or did you mean 680 from Syd. to Conargo?
and about 380km from the island
there’s the answer to your bike dilemma Aido, just convert the V-Rod
a new movie/ show on the other day had a Ducati 695 in it. every time the guy pulled up it had a 4 cylinder revving dubbed in. :S :dry:
getting the 2T club members to divulge any info on who is or may be a member, would be like getting a BRP owner to admit that they actually know they won’t one day rule the world
:laugh: :laugh: :silly:
no worries Tisco. knowing how busy everyone is, it’s a wonder there aren’t a lot more typo’s.
i sort of was hoping it was 100 000. but gathered you must have meant 10 000. just had to double check though.
in saying that 10 000 km with only valve clearances is still pretty good.
:blink: is that 100 000 km correct Tisco??
you didn’t have to do cam chain or cam bearings?? or even rings??
Trailboss wrote:
Quote:BOLLOCKS wrote:Quote:Bloke in a night club sees a huge fat girl at the bar he walks up to her and asks”Have you got a pen?”She looks up and smiled and says”Yes I do”
“Well” he says”you’d better f-ck off back to it then before the farmer finds you’r missing”
Now that’s bloody funny :laugh: :laugh: :laugh: :laugh: :laugh:
as a bloke i find this Highly Offensive !! :angry:
a ‘bloke’ would not be in a night club, he would be in a Pub. 😆 :cheer:
hey! what’s Menace doing with my hat on?!?!?!
aido wrote:
Quote:These photos are that disturbing i thought it could be my first moderation attempt :laugh:well if i’m going to be moderated i may as well make it worth your while aido
and post up the topless ones that followed that sequence
as a guide Husky i just bought a 8×4 foot 2mm thick sheet of aluminium for $120.
so if you go to a metal work shop that uses alum. with the diameter of the disc(s) you want they’d probably only charge a couple of $$ for the alum. and a few $$ for labour.
i’d offer to cut some for any that would want some but ATM i only have a jig saw and the finished product is not that flash :blush:
however if someone does want some cut i can get a price from a local shop to plasma cut some.. i’d prob. recommend 3-4mm over 2mm though just to be on the safe side, i feel the 2mm stuff may tend to bend too easily.
but if someone can have a look at the ones they have and let me know thickness and are both sides the same diameter??
-
AuthorPosts