[drewMember]

hi Andrew!

you must be a Top bloke!:woohoo: :laugh: :laugh: :laugh:

a second hand wr250 ay, hasn’t got a really badly scratched swing arm?

sorry chris, i thought it was funny.

anyway, welcome along! enjoy this fine site.

[drewMember]

nar your seeing things mich!

you are correct the pic of mickp has the thermo switch fitted. the one scott-tisco posted dose not seem to have it, just a bung/ block off .

once the hose is replaced, would a heat shield like they flog on ebay lessen the radiant heat transfer?

could the tune of the bike affect the temp the pipe runs at?

has the bike with the prob been moded apart from the muffler?

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=290336090407&viewitem=&salenotsupported

[drewMember]

boony wrote

Quote:

just need the first 19 to have an hour oops and Hello theres a DRZ in the lead… imagine tha,t it would be great and,,,,,(just dreaming out loud sorry)

:dry:

more like someone would leave a narna skin for the leader’s to slip up on!!

[drewMember]

hmmm 14 minutes a day?

it’s not impossible.

only takes one of the other riders to have a similar issue and Ben could be 5min ahead.

what about team ECKS!?!?!?!?!

[drewMember]

if we’re riding sunday i’ll be staying sunday night too.

[drewMember]

my 1st thought is to helli coil it.

it would be drilled to the size needed and tapped to fit the coil,

and if they use a jig of sorts it should be square again, and you retain your original drain bolt.

at worst you may have to get someone to weld up the hole and re drill it.

i wonder if you could use 2 washers, 1 against the case, 1 against the bolt and use some alloy epoxy between the washers, do it up just firm, let it set.

the only issue with this is you would have to get the washer in the right place each time you change the oil.

the other option is to put the epoxy on the case, put the washer and bolt in again just firm, let it set and it should be right from then on.

[drewMember]

just an update of sorts.

i will be unable to attend this fine ride.:unsure:

maybe i’ll have my own car again for the snow.

[drewMember]

2009 safari = Team ECKS / Dave / Husky:woohoo:

[drewMember]

giday Crancky,

Welcome along!!

near the boarder myself. or is that by myself? both fit. :silly:

so i’m not out much as don’t like riding on my own as much as i used to. + not a huge area to ride in.

neither have i met any old bulls in the flesh yet.

will have to wait till the snow.

class clown, drew.:blink:

[drewMember]

Husky610 wrote:

Quote:

I just Look forward to no more cracked bones in my hands..Funny thing about he Mirrors Shane.. the big one on my bike has saved me a few times from spilling. :laugh: .:huh:
Pity I couldnt find someone stocking them here

what’s up with the big mirror? glass? stem/rod?

my bro cartwheeled katie, broke the mirror glass, he got the window place to cut some new mirror glass. bent the rod back into shape, L/h side perch and all good.

[drewMember]

cycle tune wrote:

Quote:

yes he is. the most the pipes have been out is 10mm in tuned lengh not bad hey it just makes it so easy with his programe and my dyno no gess work

Maaate, Buddy Paaaal! newest best friend!

:laugh: :laugh: :laugh:

done any tuning on older (’02) KTM 640’s?

[drewMember]

Boony wrote:

Quote:

we got that there elektricity now,, we`s got lights too.

so yud bay un the mareket fo a frudge un deeap freeza ta take tha cool gardy suff thien.

[drewMember]

JAK wrote:

Quote:

I may not be smart, but i can lift heavy things.:blush:

ahrrrr you must have been borne in my neighbourhood!

3/4 dose of brain cells, x2 dose of balls:ohmy:

:silly:

[drewMember]

hey manace,

what shape package should i send Boony?:cheer: 😆 :laugh: :woohoo:

👿 👿 👿

[drewMember]

hey i just worked out we have a superstar’s offspring as a member!

Boon Unit Zapper.

:laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh:

[Author]

Posts