Greg

Forum Replies Created

Viewing 15 posts - 6,046 through 6,060 (of 19,738 total)
  • Author
    Posts
  • in reply to: Northern Rivers Adv Ride August 17-19 #203375

    Greg
    Member

    Funny Kram :laugh: better to have a wash than breakdown every second day :laugh: :P

    IB

    in reply to: Yamaha Tenere XTZ660 TB’s done 20,000kms #203366

    Greg
    Member
    brettfirey wrote:
    hello trailboss, need some help!!!, just got a steering damper like the one you have (ralle-moto Adventure). At the front of the Ignition, the pin for the damper is meant to be bolted, but there is no holes for this, did you drill holes or drill out the pins that are there, can you let me know?

    by the way, great report on the bike and gear, very helpful
    brett
    [attachment=2566]061.JPG[/attachment]

    Here Brett is the post I did when I fitted it, it is in the 10k on the Tenere post

    “Fitted my damper today, wasnt the easiest damper I have ever fitted I have to say but worked out great

    IMGP0249.jpg

    Original setup with bar risers

    IMGP0254.jpg

    The ignition cover needs to come off, two phillip screws

    IMGP0255.jpg

    Once the cover was removed it reveled the steering lock bolts are shear bolts. Once they are tight they shear and it prevents people unbolting the steering lock

    IMGP0257.jpg
    IMGP0256.jpg
    IMGP0258.jpg

    I drilled a small hole in the cente and once I was sure it was in the centre I drilled it as big as I dared below the head height

    IMGP0259.jpg

    I then used a drill bigger than the bolt shaft size to get rid of the head

    IMGP0260.jpg

    I used an easy out and removed both bolts

    IMGP0262.jpg
    IMGP0265.jpg

    Both bolts out, ready for the pin bracket

    IMGP0267.jpg
    IMGP0281.jpg

    Once done I removed the standard bar mounts and mounted the bar mount bracket, it needed a spacer between the rubber mounts and the bracket

    IMGP0280.jpg

    It was now I discovered I hadn’t listened to Steve when he said it is a fat bar mount, I flew down got Suttos and got a few sets of bars so I could try a few before I decided. (try that with your cheap US web shops :laugh: )
    Once a set was found I bolted it all up and happy days

    IMGP0283.jpg
    IMGP0282.jpg
    IMGP0284.jpg
    IMGP0285.jpg
    IMGP0290.jpg
    IMGP0289.jpg

    I then drilled and tapped a thread to mount my GPS

    IMGP0286.jpg
    IMGP0287.jpg

    The only other thing need was a fat bat bark buster mount kit”

    TB

    in reply to: Northern Rivers Adv Ride August 17-19 #203354

    Greg
    Member

    Big days push hard and fast ride all day few stops ride ride ride, good pre run for Camerons , test your gear ;)

    But we get counter lunches :laugh: :whistle:

    Nice and local for you Moose and Kram ;)

    TB

    in reply to: OBT 3rd birthday ride report 2011 #203352

    Greg
    Member
    Boony wrote:
    no probs ;)

    Yeah sorry mate, this trip came out of the blue :ohmy: I will really do it this weekend mate, I am home alone this weekend pinky promise 😆

    TB

    in reply to: OBT 3rd birthday ride report 2011 #203338

    Greg
    Member
    Boony wrote:
    Hoy,,, what happened to this list mate????? :whistle:

    Am in Melbourne Boons, last minute trip will now have to be the weekend sorry :(

    in reply to: WRC Saturday the 10th september #203319

    Greg
    Member

    Yes please Corey count me in for a camp spot

    TB

    in reply to: Wanted to buy, set of Duck feet. #203287

    Greg
    Member

    Got to stop soon hasn’t it :dry:

    Funny thing is when I read this header I thought webbed feet :blink: Wauchope I thought the inner breeding would have caused webbed feet l by now :laugh: :laugh:

    Good luck Moose and others

    TB

    in reply to: NEWY to WISEMANS & Back Sunday 10th July #203269

    Greg
    Member

    15th of July mate

    TB

    in reply to: Ballards #203268

    Greg
    Member

    6a0efe6f.png

    Fax it

    in reply to: NEWY to WISEMANS & Back Sunday 10th July #203224

    Greg
    Member

    I will meet you somewhere Beags and ride back to Wisemans mate for lunch

    TB

    in reply to: Ballards #203218

    Greg
    Member

    I don’t think Ballards do anything via email they are all phone or fax I think

    Just checked their site no email

    TB

    in reply to: Happy Birthday Krusty ! #203189

    Greg
    Member
    King STM wrote:
    Judging by the rush of birthdays in July it seems it is a month many OBT legends were born, and you! :P

    Have a great day mate.

    STM

    ummmm its June King :unsure: :whistle:

    in reply to: Happy Birthday Krusty ! #203182

    Greg
    Member
    OWL 02 wrote:
    TB, you should know if you’ve had it done. They remove the old bearings and install new lite weight ones. Probably out of a BRP I suggest

    Nothing light weight in or on a BRP :laugh:

    in reply to: Happy Birthday Krusty ! #203181

    Greg
    Member
    Corey8 wrote:
    Trailboss wrote:
    OWL 02 wrote:
    good luck with the snip when you get it done. Been there done that.

    Gaz

    ADMIN !!!! ADMIN !!!! moderate that post that is way to much f*#king information right there :blink: :blink: :sick: :pinch:

    Its the best thing i had done Krusty and takes a real man unlike some bosses ;)

    :laugh: :laugh: Bit sensitive there still sore :laugh: :P Maybe I have had it done maybe not ;) Just didnt need to read about Krusty’s tackle over my weeties this morning :blink: :sick: :laugh: :laugh: :laugh:

    TB

    in reply to: Happy Birthday Krusty ! #203177

    Greg
    Member
    OWL 02 wrote:
    good luck with the snip when you get it done. Been there done that.

    Gaz

    ADMIN !!!! ADMIN !!!! moderate that post that is way to much f*#king information right there :blink: :blink: :sick: :pinch:

Viewing 15 posts - 6,046 through 6,060 (of 19,738 total)