[GregMember]

Is it a XT660Z you are asking about or an R if its a Z read the below if not doesnt matter :laugh:

Its a great thing, love it can do anything with it. Its ready enough to ride, doesnt need extra tanks fitted and is designed with its job in mind.

check the links on what has been done my Nick and I

http://www.obtrailriders.com/index.php?option=com_kunena&func=view&catid=18&id=91879&Itemid=75

http://www.obtrailriders.com/index.php?option=com_kunena&func=view&catid=18&id=103115&Itemid=75

http://www.obtrailriders.com/index.php?option=com_kunena&func=view&catid=18&id=96859&Itemid=75

They are a pretty ready made adventure bike the Z more so than a DR or a 690 I reckon they can carry luggage etc ready and have a good fuel range

TB

[GregMember]

What time at Freemans Eags? I will meet you guys there

TB

[GregMember]

Actually Eags I was thinking about this yesterday and thought as we are coming back in from the west to finish you could ride a distance in with us. Will chat next weekend. A thought though is that cause we have added a day getting everyone to the corner we may not get to St Alburns until Sunday which is why I have told everyone going to allow the Monday to travel home.

TB

[GregMember]

464kms, rode the Bridle trail, had a counter lunch had Hillend with Gaz and Krusty. Rode Turon River, scouted out a track I used to use years ago. Pre ran some of the track we will use coming home from the Corner. Found a new section that is better than 10 steps, I call it the wall :woohoo: Got bogged for a while had to take the bags of to get the Tenere out :laugh: Rode the Garden of Stone, some new railway service track that goes up and down like nothing else. Hit a goat (sorry Boony :laugh: ) listened to the ipod all day, told some unregos I saw that I had seen the cops on DRs cruising the area

Took the camera but was having way to much fun to stop and take pictures :laugh:

Came home played nurf wars with Kids (I have new sniper nurf gun)

Perfect day

TB

[GregMember]

TONY. wrote:

im interested in these where is the shop located?
do you have a website other than face book?

Shop is in Penrith, click on their add / icon / name sliding across the top of any page here on the site and it will take you to their site. Oh and Google is always your friend

TB

[GregMember]

Jeffro wrote:

Which bike did you take? The BBRP must be feeling pretty unloved by now if you took the Ten

What is a BBRP? :huh:

It wasnt a XR ride anyway Jeffro :huh:

The Big Red Pig is getting extra love actually It will be back soon, like maybe next weekend for a day of singles

TB

[GregMember]

Yes it is, I thought that’s why Corey got one :laugh: :cheer: :laugh: :pinch:

TB

[GregMember]

aido wrote:

Welcome to Greg’s twitter page :laugh: :laugh: :laugh: :laugh:

Twitt

I hate Aido :laugh: :laugh:

You working mate? Don’t answer got to go myself

TB

[GregMember]

Does Kram own any other clothes every time I see him he is in that jacket :laugh: :laugh: almost as bad as you used to be Mick and the BMW tee shirts you only ever wore :laugh: :laugh:

Wish I hadnt had to detour now

Poor Moose

Poor Lezza :whistle:

TB

[GregMember]

BOLLOCKS wrote:

Must have been that attractive bum in the first photo that clinched the deal :laugh: :laugh: :laugh: :laugh: :laugh: :laugh:

Thats Phil in the buggie smugglers :laugh: :laugh: (Mal RIP his brother)

TB

[GregMember]

Sold pending payment

[GregMember]

micknmeld wrote:

I dunno if it is the chemical reation between the metals or more of the fact that the swingarm isn’t a sealed unit allowing a build up of crud over the years in the tread on the end of the bolt that protrudes into the cavity in the swingarm.

Swingarms are sealed or at least mine is and there were no chnages between 2000 and 2006 regarding the swingarms

TB

[GregMember]

You need to heat the swingarm getting the alloy to expand (grow) and keep the stud cool (srink like your dick on a cold morning) when using the welded nut theory. Dont worry to much about damaging the thread in the swing arm a heli-coil will fix that and stop it ever happening again.

Having seen this I am removing both of my soon and drilling the threads out and fitting heli-coils as they are stronger than a thread straight into alloy and then my bolt will be a metal bolt in a metal thread no more dramas

TB

[GregMember]

If your discs are a little worn the sintered will take a while (not long just be aware) to bed into the shape of the discs will be all good then

TB

[GregMember]

peterloader1@bigpond.com wrote:

TB have you got contact no for suttos and tee n cee not familiar with these names from the wild west thanks pedro

Sutto’ ask for Scott, tell him your a Old Bull and TB sent you 02 47379566

Tee N Cee same as above but speak with anyone there 02 4731 2011

TB

[Author]

Posts